Type FF40HX Speed Controller - Specifications
Full 40 amp. forward only rating (motor runs forwards for both directions of the stick)
Selectable frequency mode, low, high or variable
Digital signal processing for super smooth 'glitch' free operation with fast response
Motor stops if signal is lost
Screwdriver speed range adjustment, 25 - 125% of transmitter range
Precision pre-set neutral (no repetitive switch on sequence)
150 amp. (540 amp. peak) rated MOSFET's*
Low loss Power MOSFET current switching (2.7 milli-Ohm)
Thermal overload and peak current protection (motor short or stall)
6 to 24 volt motor battery range (5.5 volt min.)
Size: 73mm (ex.mounting) x 51mm x 22mm
* Beware suppliers who quote MOSFET ratings as continuous controller rating!